Safety Climbing Systems
Safety access systems are strictly bound by paragraphs, standards and regulations due to their risky use. Their use is about the safety of human life and the sustainability of your investment. HUBER is aware of this responsibility, which is reflected in the strict quality control of our products. We offer safety ladders with and without fall protection rails, safety beams and safety runners to meet your individual needs.
Safety access ladder, with design certification and CE marking, in accordance with DIN EN 14396
Made of 1.4307 (AISI 304 L) stainless steel. Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps.
Rungs made of U-profile with perforated surface, 30 mm, slip resistance R 13, step height 280 mm, clear ladder width 300 mm, 400 mm or 500 mm.
Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Safety access ladder with guard rail, with design certification and CE marking, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel.
Designed to attach an insertable entrance aid. In accordance with UVV regulations ladders with 3 m or 5 m a height of all must be equipped with devices that protect personnel against falls from a height. In accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel, designed to attach an insertable entrance aid.
Handles made of special profile of high rigidity (57 x 25 x 2.5 mm), covered with PVC caps.
Rungs made of U-profile with perforated surface, 30 mm, slip resistance R 13, step height 280 mm, clear ladder width 400 mm or 500 mm, 150 mm long wall fixing brackets for bolting included (distance from the wall to the middle of the rung), with additional safety guard rail fixed to the middle of the ladder. Completely shielded arc welded, acid-treated in a pickling bath and passivated.
Safety climbing device, with design certification and CE marking, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel.
In accordance with UVV regulations ladders with 3 m or 5 m a height of all must be equipped with devices that protect personnel against falls from a height, in accordance with DIN EN 14396, made of 1.4307 (AISI 304 L) stainless steel.
The handle in the middle is made as a safety guard rail, with bottom and top trip gear, which can only be undone by hand, U-profile climbing rungs with perforated surface, 30 mm, slip resistance R 13 and lateral slipping limits, step height 280 mm, with fixing brackets for wall fixing (max. distance 840 mm), with coupling for insertable entrance aid. Completely shielded arc welded, acid-treated in a pickling bath and passivated.
The following entrance aid with guard rail options are available (see following pages):
- Insertable entrance aid, pivoted, type EH FSS D
- Insertable entrance aid, type EH FSS
- Insertable entrance aid, type EH FSS ‘Köln’
Fall arrestor type S5c with self-unfolding safety belt type HSE-BFD and spring safety hooks
Certified and approved by “TÜV SÜD PRODUCT SERVICE GmbH“. CE 0123 in accordance with DIN EN 353-1, suitable for HUBER safety guard rails.
Optionally available:
- Safety belt in accordance with EN 361, form A (breast-shoulder-crotch belt), suitable for safety guard rail.