Access door for containers, especially in the field of potable water supply, pressure-tight up to a water gauge of 30 m.
Pressure-tight door, pressure-tight up to a water gauge of 30 m, opening to the pressure side, ready for installation, to be lined on both sides (wall thickness ≥ 300 mm), rectangular, completely made of stainless steel, statically certified.
Door leaf curved convex design with frame reinforcements to ensure that the acting pressure forces can pass into the door frame via the circumferential frame. With circumferential special silicone seal, suitable for potable water, ozone resistant, certified to KTW and DVGW W 270 standards. Locking crank handles operable both from the door outside and, for safety reasons, also from the pressure side while the reservoir is empty.
Frame circumferential with one centre and two side gaskets, provided for embedding in concrete. Frame with lifting eyes.
Frame and door shielded arc-welded and acid bath cleaned before washing, drying and surface passivation.
Note: Guarantee for tightness between the frame and concrete is only provided if the concrete structure is homogeneous all around the circumference. The minimum concrete quality and corresponding concrete classes are to be determined by the customer. In the case of frames for retrofitting, the manufacturer‘s specifications for the fixing material must be observed.